Smart Wireless Temperature and Humidity Data Logger Model: RCW800W-THE

Key Features:

• Elitech RCW-800W-THE wireless temperature data logger has double temperature sensors.
• Elitech RCW-800W-THE wireless temperature humidity data logger has One temperature sensor and one Humidity Sensor
• Elitech App, supported by the iOS and Android system, can remotely operate parameters setting and device management.
• Email/SMS alerts, audible and visual alarm when abnormal temperature or low battery occurs.
• To prevent the accident record 20,000 offline temperature points and upload after WiFi restores. The rechargeable battery lasts up to 6 hours after full cycle charging.
• Bluetooth + WiFi distribution network by app for more Stable Network.

Technical Specifications:

• Measurement range: Temperature: -40℃~80℃ (-40℉~176℉)
• Humidity: 0%RH – 100%RH
• Temperature Accuracy: ±0.5℃/±1℉ (-20℃~40℃/-4℉~104℉),
• Humidity Accuracy: ±3%RH
• Resolution: Temperature: 0.1℃/℉; Humidity: 0.1%RH
• Temperature Sensor: NTC
• Humidity Sensor: Honeywell
• Probe Length: 5 meters
• Data Uploading Interval: 1min – 24hr
• Offline Data Record Capacity: 20,000 readings
• Online Data Record Capacity: Unlimited
• Alarm Output: Buzzer, LED indicator, email, app notification, SMS
• Communication Interface: WIFI（2.4Ghz）
• Power Supply: 5V/1A (DC)
• Battery: 3.7V, 1100mAH rechargeable lithium battery
• Storage method: Circular storage
• Display screen: TFT                                                                                                                                                        Note :
• First use: Data will only be uploaded after recording begins.(No activation status prompt , stop recording and display online)
• Probe switching: After the probe is installed, if the data displayed on the display screen is incorrect, it is recommended to shut down and restart the device.
• Data clearing operation: Pressing the start button again while recording will clear the data record.
• Wireless network that only support 2.4Ghz frequencies
• Display screen status: By default, there will be on button operation for 15 second, and the recorder display screen will pause clicking the button will light up again. The platform can set the bright  screen time(support constant light)